Customization: | Available |
---|---|
Install: | Horizontal |
Medium Temperature: | Cold Water |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Blue small iron Modbus Wired remote reading smart electronic water meter
Item |
Blue small iron Modbus Wired remote reading smart electronic water meter |
Material | Iron |
Type | Wet |
Model | MS603C |
Brand | OEM |
Features | Rmote Control,Fully electromechanical separation,Only reading |
Delivery Time | 7-30 days |
Size | DN15mm~DN25mm (1 /2''~1-1/2'') |
certificate | ISO4064 ISO9001:2008 |
packing | Standard export carton packing,Dimension:50*40*25cm |
Blue small Blue small iron Modbus Wired remote reading smart electronic water meter
Description:
Waterproof grade IP68 sealed circuit, which has been tested in various complex environments for a long time.
Features:
Only reading, remote transmission,network planning,Electromechanical separation.
Function introduction
No. |
Function name |
Function brief introduction |
Function parameter |
1 |
Measurement |
Measure pulse signals by ZERO power sensor |
|
2 |
Meter number management |
The unique identification number of each meter can only be modified by special equipment, of which the first 4 have been used, and the latter 10 for users. The meter writing function is valid under HALL pull in condition. |
14 decimal numbers: 000000000000-999999999999 |
3 |
Accumulated flow |
Forward cumulative measurement, reverse cumulative measurement, settlement cumulative flow. |
|
4 |
Initialization |
clear the measurement parameters or reset to default |
Impact parameters refer. 2.3.3 |
5 |
Correction time |
Correct anytime without leap year |
2000 year~2100 year, Minimum correction to seconds |
7 |
Battery voltage detection |
Alarm when the battery voltage reaches the lower limit |
|
8 |
Remote diagnosis |
Meter reading,reverse accumulation,balance,instantaneous flow , voltage, specified day reading, Failures,Valve Status etc. |
remote diagnosis available whenever necessary |
9 |
Data backup |
The accumulate flow data is saved by every 0.001 m3 increasement |
|
10 |
Reading and correction |
Reading current pulse,net usage (unit:ml). |
For professionals to use |
11 |
Flow coefficient reading |
Reading flow coefficient under 20 flow points |
For professionals to use |
12 |
Flow coefficient writing |
Writing flow coefficient under forward 15 flow points Writing flow coefficient under reverse 5 flow points
|
For professionals to use |
13 |
Instantaneous flow reading |
Read the current instantaneous flow, distinguish forward and reverse |
Unit:M3/H |
14 |
00:00 daily data |
Save daily 00:00 forward and reverse accumulation, status etc. |
Save for 1 week, weekly backup |
Note 1. The measurement grades are determined by the meter structure and the calibration accuracy;
Note 2 . List descending order according to flow, when the flow coefficient input is manually adjusted.
Electrical technical parameters
No. |
Name |
Parameter |
Remarks |
||||
Min |
Typical examples |
Max |
Unit |
||||
1 |
Quiescent working current |
|
19 |
24 |
uA |
Inductance, the impeller not turning in LCD |
|
2 |
Under-voltage point of the battery |
2.6 |
|
2.8 |
V |
|
|
3 |
Wireless comm. current |
|
30 |
150 |
mA |
|
|
4 |
Continuous communication intervals |
7 |
|
|
year |
Related to reading times |
|
5 |
Communication distance |
|
|
2 |
KM |
Water meter on the ground, in an open environment |
|
6 |
Main Power |
+2.7 |
+3.6 |
+3.9 |
V |
|
|
7 |
Battery |
|
+3.6 |
|
V |
|
|
8 |
Minimum comm. voltage |
2.6 |
|
|
V |
Voltage measured when battery activate |
|
9 |
Normal working temperature |
-10 |
|
50 |
ºC |
|
|
10 |
Storage temperature |
-20 |
|
60 |
ºC |
|
|
11 |
Humidity |
|
85% |
|
|
|
|
12 |
Wireless comm. Baud rates |
|
9600 |
|
Bps |
|
|
13 |
Frequency |
863 |
868 |
873 |
MHZ |
|
|
14 |
Channel |
|
21 |
|
unit |